 |
RG-118V
STQANON
6307900010
| Quantity: | |
|---|---|
| Product Name | Particulate Respirator FFP3 NR |
| Brand Name | St·QANON |
| Model | RG-118V |
| Ingredient | Needle punched fabric 45%; Melt-blown fabric 11%; Other 44%. |
| Sub-Assemblies and Components | Valve |
| Quantity | 20 pieces/box |
| China Standards Complied | |
| Certificates | |
| Shelf Life | 2 years |
| Carton Size | 400 pieces/ctn |
| 20 boxes/ctn | |
| 72*33.5*51.5cm | |
| N.W. | 8.42kg/ctn(appr.) |
| G.W. | 9.86kg/ctn(appr.) |
| Volume Weight | 20.703-24.8kg/ctn depending on shipping agent’s measurement method |
| Recommendation for Use(RFU) | PPE-R/02.075 version 2 |
| Usage | 1. All respirator components should be inspected and ensure no damage before use. |
| 2. Hold respirator in one hand with nose-clip at fingertips, allow headbands hang freely. | |
| 3. Hold the respirator under chin, with nose-clip up. | |
| 4. Put the lower strap below your ears and upper strap above your ears on back side of your head. | |
| 5. Straps must not be twisted. | |
| 6. Use both hands, pinch and mold the nose-clip to well fit to your nose and get good seal. Use only one hand to pinch the nose-clip may cause the respirator in less effective performance. | |
| 7. Please do fit check before enter hazardous area. |
Product Characteristics：
Protect Against COVID-19
Double Meltblown Fabrics
Soft and Comfortable
Well-fitted in 3D Modeling
| Product Name | Particulate Respirator FFP3 NR |
| Brand Name | St·QANON |
| Model | RG-118V |
| Ingredient | Needle punched fabric 45%; Melt-blown fabric 11%; Other 44%. |
| Sub-Assemblies and Components | Valve |
| Quantity | 20 pieces/box |
| China Standards Complied | |
| Certificates | |
| Shelf Life | 2 years |
| Carton Size | 400 pieces/ctn |
| 20 boxes/ctn | |
| 72*33.5*51.5cm | |
| N.W. | 8.42kg/ctn(appr.) |
| G.W. | 9.86kg/ctn(appr.) |
| Volume Weight | 20.703-24.8kg/ctn depending on shipping agent’s measurement method |
| Recommendation for Use(RFU) | PPE-R/02.075 version 2 |
| Usage | 1. All respirator components should be inspected and ensure no damage before use. |
| 2. Hold respirator in one hand with nose-clip at fingertips, allow headbands hang freely. | |
| 3. Hold the respirator under chin, with nose-clip up. | |
| 4. Put the lower strap below your ears and upper strap above your ears on back side of your head. | |
| 5. Straps must not be twisted. | |
| 6. Use both hands, pinch and mold the nose-clip to well fit to your nose and get good seal. Use only one hand to pinch the nose-clip may cause the respirator in less effective performance. | |
| 7. Please do fit check before enter hazardous area. |
Product Characteristics：
Protect Against COVID-19
Double Meltblown Fabrics
Soft and Comfortable
Well-fitted in 3D Modeling
