You are here: Home » News » Products News » Can I reuse my ffp3 mask?

Can I reuse my ffp3 mask?

Views:0     Author:Site Editor     Publish Time: 2021-04-15      Origin:Site

Can I reuse my ffp3 mask?

FFP3 masks refer to masks that meet the European (CEEN149:2001) standard. The European standards for protective masks are divided into three levels: FFP1, FFP2, and FFP3. The difference from the American standard is that its detection flow rate is 95L/min and DOP oil is used to generate dust. How many times can ffp3 mask use? Can I reuse my ffp3 mask?


This passage is going to talk about the followings of reuse ffp3 mask:

What is ffp3 mask?

Types of Ffp3 masks

Can I reuse Ffp3 masks?

 

What is ffp3 mask?

Filter-type gas masks are personal protective equipment designed to prevent the wearer from inhaling aerosols that are harmful to health. On average, the protection factor of FFP respirators is 12 to 16 times that of surgical masks, although the fit of the wearer’s face is the most important factor in its effectiveness, and the system’s "fitness" test is crucial important. In Europe, respirators must comply with the European standard EN 149:2001, which includes 3 types of disposable particulate respirators. FFP1 refers to the smallest filter among the three masks. For 0.3μm particles, its aerosol filtration rate is at least 80%. It is mainly used as an environmental dust mask. The lowest filtration percentage of FFP2 masks is 94%, and Ffp3 masks are the most filtered masks in FFP. Their minimum filtration percentage is 99%, which can prevent very fine particles such as asbestos.

ffp3 mask 

Types of Ffp3 masks

1. Disposable anti-particulate mask: alias: "disposable Ffp3 mask" This anti-particulate mask is suitable for short-term use in polluted environments.

2. Half face mask: alias: "FFP3 category mask", "dust mask", "dust mask" with exhalation valve design, reducing heat accumulation, making breathing easier, suitable for long-term use in high temperature and high humidity environments. Non-toxic, Tasteless, non-allergic, non-irritating raw materials. High filtration efficiency, low resistance, adjustable nose clip, make the mask and face more tightly sealed, dust cannot easily leak into the electrostatically treated filter layer, effectively filter and absorb extremely fine harmful industrial dust, and prevent silicosis Ultrasonic welding, the elastic band of spandex yarn material more effectively protects the wearer. Applications: construction industry, agriculture and animal husbandry, food processing industry, cement factory, textile factory, cutting dust, heavy metal hazardous pollutants, workplaces.

3. Full-face mask: alias: dust-proof full-face mask, which is used in special environments.

 

Can I reuse Ffp3 masks?

In order to prevent infection, some people may wear medical masks all day long, but this will weaken the nasal mucosa, lose the original physiological functions of the nasal cavity, and reduce resistance. Therefore, in places with low population density and ventilation, No need to wear a mask.

It should be reminded that the protective effect of any type of mask is time-effective and must be replaced regularly. It is recommended to replace the mask every 2 to 4 hours. If the mask is contaminated, it should be replaced as soon as possible.

When not in use, the medical mask should be folded and stored in a zip-lock bag. It is not recommended to take the mask off and put it in your pocket or bag directly. This will easily cause secondary contamination of the medical mask. Be sure to fold it and put it in a clean zip-lock bag, and fold the side that touches the nose and mouth facing inward.

 

We hope this article has helped you understand more about what is ffp3 mask and can ffp3 mask be reused. If you need ffp3 masks, do not hesitate to contact us. Our products will be your best choice.


PHONE

+86-20-39293697

WhatsApp

+86-13352837179

COMPANY ADDRESS

Office Address: 
Room 604, North Tower Fuliyingli Building,  
No.3-2, Huaqiang Road, Tianhe District, 
Guangzhou 510000, China

Manufacturer Address: 
No.6, Xinghong 2nd Street, 
PingShanErCun Industrial Park, 
Shibi Subdistrict, Panyu District, 
Guangzhou 510000, China

QUICK LINKS

LATEST NEWS

SEND MESSAGE
Copyright 2020 Guangzhou Renault Biotechnology Co., Ltd     |     Technology by leadong.com